Plastic Extrusion Blowing Molding Machine

Description

Description

MACHINE FEATURES

1 LTY70D-1T is double station single head view stripe EBM model for 5L as maximum.
2 Its output for 5L 150g jerry can is 215 Pcs/hour, the daily capacity is about 4800 Pcs.
3 High efficiency extrusion system generally suitable for LDPE, HDPE and PP material.
4 High-hardness alloy coating screw driven by SIEMENS motor for plasticizing 80 KG.
5 Adopt axial type translational clamping unit guided with linear rails for platen moving.
6 With two pneumatic cylinder for head lifting in balance, clean & easy for maintenance.
7 Optimized hydraulic system with mechanical shuttle valve for platen moving stability.
8 High speed total machine cotrol system and 100 point parison thickness controller.
9 Lubrication system, product clamping boards and scraps slide channels are included.

SAMPLES SUITABLE

CONFIGURATION LIST

COMPONENTS BRAND ORIGIN
TOTAL MACHINE CONTROL WISETECH HONGKONG
7.5 COLORFUL TOUCH SCREEN WIRETECH TAIWAN
CONTRACTOR SCHNEIDER FRANCE
AIR SWITCH SCHNEIDER FRANCE
PROXIMITY SWITCH RIKO TAIWAN
INVERTER DELTA TAIWAN
OIL FILTER DONGFANG CHINA
OIL TUBE & JOINT PACKER U.S.A.
SEAL PARTS DZ TAIWAN
HYDRAULIC PUMP HYTEK TAIWAN
HYDRAULIC VALVE HYTEK TAIWAN
PNEUMATIC VALVE & CYLINDER AIRTAC TAIWAN
COMPRESSED AIR FILTER AIRTAC TAIWAN
LINEAR GUIDE RAILS HIWIN TAIWAN
HARD GEAR BOX HAOKE CHINA
EXTRUSION MOTOR SIEMENS BEIDE GERMANY/CHINA
HYDRAULIC SERVO MOTOR SIEMENS BEIDE GERMANY/CHINA

MACHINE DETAILS

SPECIFICATION LIST

规格 SPECIFICATIOIN 参数 /PARAMETER
最大制品容积 Max Product Volume 5 L
空循环时间 Dry Cycle Time 7.5 Second
预热时间 Pre-heating Time 2.0~2.5 Hours
机器重量 Machine Weight 4.8 Tons
机器尺寸 Machine Size 3.8*2.2*2.4 m
挤出部分 /EXTRUSION UNIT
挤出分布 Extruder Distribution Main Screw View Stripe Screw
螺杆直径 Screw Diameter 70 mm 25 mm
长径比 Length/Diameter Ratio 24:1 25:1
加热段数 Heating Zone No. 4 2
加热功率 Heating Power 14.2 KW 1.2 KW
风机数量 Cooling Fan No. 3
风机功率 Fan Power 0.45 KW
绞料电机功率 Extrusion Motor Power 22 KW 1.5 KW
塑化能力 Plasticizing Capacity 80 KG 7 Kg
锁模部分 /CLAMPING UNIT
锁模力 Clamping Force 68 KN
模板尺寸 Platen Size 320*390 mm
移模行程 Platen Moving Distance 420 mm
开模间距 Platen Opening Stroke 150-500 mm
最大模具尺寸 Max Mould Size 350*390 mm
模具厚度 Mould Thickness 155-300 mm
模头部分 /HEAD UNIT
模头形式 Head Type Transparent Line Continuous Head
模头数量 Head Cavity No. 1 Cavity 2 Cavity
模头间距 Central Distance 160 mm
最大口模直径 Max Die Diameter 135 mm 80 mm
加热段数 Heating Zone No. 2+1 3
加热功率 Heating Power 5.7 KW 4.8 KW
能耗 /ENERGY CONSUMPTION
绞料电机功率 Extrusion Motor Power 23.5 KW
油泵电机功率 Oil Pump Motor Power 5.5 KW
螺杆加热功率 Extrusion Heating Power 15.4 KW
模头加热功率 Head Heating Power 5.7 KW
冷却风机功率 Cooling Fan Power 0.45 KW
最大总功率 Total Power 50.55 KW
平均能耗 Average Energy Consumption 32.5 KW
相关参考 /REFERENCE
冷却水 Cold Water Needed 0.3 Mpa

Reviews

There are no reviews yet.

Be the first to review “Plastic Extrusion Blowing Molding Machine”

Your email address will not be published. Required fields are marked *