Description
Description
| SPECIFICATION | LTY900 | |||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 30 | 32 | 35 | 38 |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 23.5 | 22 | 20.1 | 18.5 |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm3 | 117 | 133 | 158 | 187 |
| 注å°éé | INJECTION WEIGHT(PS) | g | 106 | 121 | 144 | 170 |
| 注å°éç | INJECTION RATE | g/s | 71 | 81 | 97 | 115 |
| 注å°åå | INJECTION PRESSURE | MPa | 230 | 203 | 170 | 144 |
| èºæ转é | SCREW SPEED | rpm | 240 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | kN | 900 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 320 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 360×360 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 350 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 150 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 90 | |||
| 顶åºå | EJECTOR FORCE | kN | 30 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 11 | |||
Reviews
There are no reviews yet.