Description
Description
| è§æ ¼ | SPECIFICATION | LTY5000-2 | ||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 75 | 80 | 85 | 90 |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 22.7 | 21 | 20 | 18.9 |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm 3 | 1727 | 1965 | 2218 | 2487 |
| 注å°éé | INJECTION WEIGHT(PS) | g | 1560 | 1788 | 2018 | 2266 |
| 注å°éç | INJECTION RATE | g/s | 386 | 442 | 499 | 560 |
| 注å°åå | INJECTION PRESSURE | MPa | 191 | 168 | 148 | 132 |
| èºæ转é | SCREW SPEED | rpm | 130 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | KN | 5000 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 770 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 830×830 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 810 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 330 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 240 | |||
| 顶åºå | EJECTOR FORCE | KN | 150 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 55 | |||
| çµçåç | ||||||
Reviews
There are no reviews yet.