Description
Description
| è§æ ¼ | SPECIFICATION | LTY3200 | ||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 67 | 70 | 75 | |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 23 | 22 | 20.5 | |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm 3 | 1181 | 1289 | 1480 | |
| 注å°éé | INJECTION WEIGHT(PS) | g | 1076 | 1175 | 1349 | |
| 注å°éç | INJECTION RATE | g/s | 337 | 368 | 422 | |
| 注å°åå | INJECTION PRESSURE | MPa | 186 | 170 | 148 | |
| èºæ转é | SCREW SPEED | rpm | 190 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | KN | 3200 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 660 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 680×680 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 720 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 250 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 160 | |||
| 顶åºå | EJECTOR FORCE | KN | 70 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 37 | |||
| çµçåç | ||||||
Reviews
There are no reviews yet.