Description
Description
| è§æ ¼ | SPECIFICATION | LTY2800 | ||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 55 | 60 | 65 | |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 24 | 22 | 20.3 | |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm 3 | 591.6 | 704 | 826.2 | |
| 注å°éé | INJECTION WEIGHT(PS) | g | 538 | 641 | 752 | |
| 注å°éç | INJECTION RATE | g/s | 223.5 | 266 | 312.2 | |
| 注å°åå | INJECTION PRESSURE | MPa | 202.3 | 170 | 144.9 | |
| èºæ转é | SCREW SPEED | rpm | 220 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | KN | 2800 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 590 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 630×630 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 630 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 200 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 150 | |||
| 顶åºå | EJECTOR FORCE | KN | 70 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 30 | |||
Reviews
There are no reviews yet.