Description
Description
| è§æ ¼ | SPECIFICATION | LT Y2500 | ||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 50 | 55 | 60 | |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 24.2 | 22 | 20.2 | |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm 3 | 455 | 550 | 655 | |
| 注å°éé | INJECTION WEIGHT(PS) | g | 416 | 503 | 600 | |
| 注å°éç | INJECTION RATE | g/s | 187 | 227 | 270 | |
| 注å°åå | INJECTION PRESSURE | MPa | 205 | 169 | 142 | |
| èºæ转é | SCREW SPEED | rpm | 180 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | KN | 2500 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 540 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 580×580 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 550 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 200 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 150 | |||
| 顶åºå | EJECTOR FORCE | KN | 70 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 22 | |||
Reviews
There are no reviews yet.