Description
Description
| è§æ ¼ | SPECIFICATION | LT Y1100 | ||||
| A | B | C | D | |||
| 注å°è£ ç½® | INJECTION UNIT | |||||
| èºæç´å¾ | SCREW DIAMETER | mm | 32 | 35 | 38 | 42 |
| èºæé¿å¾æ¯ | SCREW L/D RATIO | L/D | 24.1 | 22 | 20.2 | 18.4 |
| ç论注å°å®¹é | SHOT VOLUME(THEORETICAL) | cm3 | 137 | 163 | 192 | 235 |
| 注å°éé | INJECTION WEIGHT(PS) | g | 125 | 148 | 175 | 213 |
| 注å°éç | INJECTION RATE | g/s | 74 | 89 | 105 | 128.1 |
| 注å°åå | INJECTION PRESSURE | MPa | 260 | 219 | 186 | 152 |
| èºæ转é | SCREW SPEED | rpm | 255 | |||
| åæ¨¡è£ ç½® | CLAMPING UNIT | |||||
| å模å | CLAMP FORCE | kN | 1100 | |||
| 移模è¡ç¨ | OPEN STROKE | mm | 350 | |||
| ææé´è· ( 宽 * é« ) | SPACE BETWEEN TIE BARS(W*H) | mm | 410×410 | |||
| æ大模å | MAX.MOULD HEIGHT | mm | 380 | |||
| æå°æ¨¡å | MIN.MOULD HEIGHT | mm | 150 | |||
| 顶åºè¡ç¨ | EJECTOR STROKE | mm | 100 | |||
| 顶åºå | EJECTOR FORCE | KN | 38 | |||
| å ¶å® | OTHER | |||||
| æ大油泵åå | MAX.PUMP PRESSURE | MPa | 16 | |||
| 油泵马达åç | PUMP MOTOR POWER | kW | 13 | |||
| çµçåç | HEATING POWER | |||||
Reviews
There are no reviews yet.